Q1: What is the primary purpose of a specialized thinner, and when should it be used?
A: Its primary purpose is to precisely adjust the viscosity of solvent-based coatings for optimal application (spraying, brushing, or rolling). It should be used when the coating is too thick for the chosen application method, or when environmental conditions (temperature, humidity) affect the material's workability, to ensure smooth flow, even coverage, and proper film formation.

Q2: Is this thinner universally compatible with all solvent-based coatings?
A: No. It is specifically formulated for compatibility with designated coating systems (e.g., acrylic, polyurethane, alkyd). Using an incompatible thinner may cause resin precipitation, poor adhesion, or curing defects. Always refer to the coating manufacturer's recommendations or conduct a compatibility test before full-scale use.

Q3: What are the key safety and handling guidelines for using this thinner?
A: As a solvent-based product, it requires careful handling. Use in well-ventilated areas, away from ignition sources, and wear appropriate PPE (gloves, goggles, respiratory protection). Follow local regulations for storage, disposal, and VOC emissions. Never mix with unknown chemicals, and seal containers tightly when not in use.